Mohsen Hassan| Micro-forming Award | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Prof .Mohsen Hassan| Micro-forming Award | Best Researcher Award

Prof.Mohsen Hassan ,Egypt-Japan University of Science and Technology, Egypt

Dr. Mohsen Hassan is a distinguished academic and researcher affiliated with the Egypt-Japan University of Science and Technology (E-JUST) in Egypt. With a profound expertise in his field, Dr. Hassan has made significant contributions to the advancement of science and technology, particularly in the areas of [please specify the field if available]. His academic journey includes extensive research, publications, and collaborations both nationally and internationally. Dr. Hassan’s dedication to education and research has not only enriched the academic community but also inspired aspiring scientists and engineers. As a prominent figure in academia, Dr. Hassan continues to drive innovation and excellence in his field, shaping the future of science and technology in Egypt and beyond.

 

Professional Profiles:

Scopus

Education 

  • B.Sc. Mechanical Engineering (Design and production engineering), May 1991, Minia University, Egypt
  • M.Sc. Mechanical Engineering (Sheet metal forming), January 1998, Assiut University, Egypt
  • Ph.D. Information and Production Science, March 2002, Kyoto Institute of Technology, Japan

Working Experience:

  • Teaching and research assistant, Assiut University, Egypt (1993-1998)
  • Assistant Lecturer, Assiut University, Egypt (February 1998 – October 1998)
  • Research student, Kyoto Institute of Technology, Japan (November 1998 – March 1999)
  • Research and teaching assistance, Kyoto Institute of Technology, Japan (April 1999 – February 2002)
  • Invited research scholar, Kyoto University, Japan (October 2003 – September 2005)
  • Assistant professor (senior lecturer), Assiut University, Egypt (October 2002 – January 2008)
  • Associate professor, Assiut University, Egypt (April 2018 – October 2022)
  • Visiting Associate professor, University of Malaya, Malaysia (August 2010 – August 2012)
  • Associate professor, University of Malaya, Malaysia (August 2012 – August 2015)
  • Professor, Assiut University, Egypt (February 2008 – present)
  • Professor, Egypt-Japan University for Science and Technology, Egypt (October 2016 – present)
  • Director of the Quality Assurance & Accreditation Center, Egypt-Japan University for Science and Technology
  • Chairman of Materials Science and Engineering Department, Egypt-Japan University of Science and Technology

Teaching Experience:

  • Post-Doctoral Fellowship in Architecture and Civil Engineering, City University of Hong Kong
  • Teaching Assistant, Department of Civil Engineering, The University of Hong Kong
  • Teaching and Research Assistant, Kwame Nkrumah University of Science and Technology, Ghana

Major Research Topics:

  • Mechanical properties and materials models
  • Non-destructive techniques
  • Forming and micro-forming
  • Finite Element Analysis
  • Microelectromechanical Systems (MEMS)
  • Fuzzy Logic control
  • Electro-mechanical properties of materials
  • High-temperature synthesis materials
  • Heart mechanics simulation

Administrative Duties:

  • Held various administrative positions including Director of Quality Assurance, Chairman of Departments, and member of University Councils

Research Projects:

  • Engaged in multiple research projects focusing on materials science, mechanical behavior, and manufacturing processes

Publications:

1.The Influences of Nb Microalloying and Grain Refinement Thermal Cycling on Microstructure and Tribological Properties of Armox 500T

MaterialsThis link is disabled., 2023, 16(23), 7485

2.A review on TMDCs nanomaterials and their surface engineered polymeric membrane nanocomposites for water remediation and wastewater treatment
Kayanja, O., Abdel-Aty, A.A.R., Hassan, M.A., …Ohashi, H., Khalil, A.S.G.
3.Analysis and development of elliptical tool path in trochoidal milling
Wagih, M., Maher, I., El-Hofy, H., Yan, J., Hassan, M.A.CIRP Journal of Manufacturing Science and TechnologyThis link is disabled., 2023, 47, pp. 168–183

4.A Developed Jerk Sensor for Seismic Vibration Measurements: Modeling, Simulation and Experimental Verification

Geriesh, M.M., Fath El-Bab, A.M.R., Khair-Eldeen, W., Mohamadien, H.A., Hassan, M.A.SensorsThis link is disabled., 2023, 23(12), 5730

5.Effect of phase disparity of MoS2 nanosheets on the performance of PES membranes for dual industrial oil-in-water emulsion separation and dyes adsorption
Kayanja, O., Hassan, M.A., Hassanin, A., Ohashi, H., Khalil, A.S.G.Process Safety and Environmental ProtectionThis link is disabled., 2023, 171, pp. 55–70
6.Application of artificial intelligence techniques in modeling attenuation behavior of ionization radiation: a review
Boahen, J.K., Elsagheer Mohamed, S.A., Khalil, A.S.G., Hassan, M.A.Radiation Detection Technology and MethodsThis link is disabled., 2023, 7(1), pp. 56–83
7.A Developed Jerk Sensor for Seismic Vibration Measurements: Modeling, Simulation and Experimental Verification
Geriesh, M.M., Fath El-Bab, A.M.R., Khair-Eldeen, W., Mohamadien, H.A., Hassan, M.A.SensorsThis link is disabled., 2023, 23(12), 5730
8.EJUSTCO: Monte Carlo radiation transport code hybrid with ANN model for gamma-ray shielding simulation

Nuclear Science and TechniquesThis link is disabled., 2023, 34(9), 144

Mohamed Yacin Sikkandar | Biomedical Engineering | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Assoc Prof Dr .Mohamed Yacin Sikkandar | Biomedical Engineering | Best Researcher Award

Assoc Prof Dr.Mohamed Yacin Sikkandar,Majmaah University,Saudi Arabia

Assoc. Prof. Dr. Mohamed Yacin Sikkandar is a distinguished academic affiliated with Majmaah University. With expertise in [mention area of expertise, e.g., computer science, literature, etc.], he has made significant contributions to both research and education. Dr. Sikkandar holds the position of Associate Professor, where he actively engages in teaching, research, and academic leadership. His dedication to advancing knowledge and nurturing young minds has earned him recognition within the academic community

Professional Profiles:

Scopus

Qualification:

Graduated from the prestigious Indian Institute of Technology Madras with a Doctorate in Biomedical Engineering.Holds a Master’s degree in Biomedical Engineering from the same institute.Completed Bachelor’s in Instrumentation & Control Engineering from Madurai Kamaraj University, India.

Professional Experience:

Currently serves as an Associate Professor in the Department of Medical Equipment Technology at Majmaah University, Saudi Arabia.Previously held positions as Professor and Head of Department in Biomedical Engineering at Rajalakshmi Engineering College and as Assistant Professor and Head of Department in Instrumentation & Control Engineering at Sethu Institute of Technology.

Research Contributions:

Dr. Sikkandar has been actively involved in various funded research projects, focusing on areas such as finite element analysis, biomedical instrumentation, and medical imaging.Notable projects include studies on scoliotic progression, biomedical rehabilitation methods, and automatic segmentation techniques.

Professional Memberships and Awards :

Holds senior memberships in prestigious societies such as the IEEE Engineering in Medicine and Biology Society and the American Society of Mechanical Engineers.Received awards including UGC Travel Grant Award and International Fellowship on Health Technology Assessment.

Publications:

1.Hidden Markov Model based Predicting of Alzheimer’s Disease with graph cut segmentation using MR Diffusion Tensor Imaging (DTI)Sikkandar, M.Y., Begum, S.S., Algamdi, M.S., …Almutairi, A.F., Almutairi, M.S.^This link is disabled., 2024, 46(2), pp. 4277–4289

2.Sandpiper Optimization Algorithm with Region Growing Based Robust Retinal Blood Vessel Segmentation ApproachAlMohimeed, I., Sikkandar, M.Y., Mohanarathinam, A., …Karim, F.K., Mostafa, S.MThis link is disabled., 2024

3.Optimal Deep Learning-Based Recognition Model for EEG Enabled Brain-Computer Interfaces Using Motor-ImageryRajalakshmi, S., Almohimeed, I., Sikkandar, M.Y., Sabarunisha Begum, S.This link is disabled., 2023, 23(6), pp. 248–253

4.Employing Deep-Learning Approach for the Early Detection of Mild Cognitive Impairment Transitions through the Analysis of Digital Biomarkers
5.Finite Element Analysis Of Customized Knee Implants By Varying Loads During Flexion-Extension Movement
6.Computation of Vascular Parameters: Implementing Methodology and Performance Analysis
7.Numerical investigation of hemodynamic pattern in carotid artery dynamic aneurysm on bifurcation region for early clinical decision making
8.Diabetic Foot Assessment and Care: Barriers and Facilitators in a Cross-Sectional Study in Bangalore, India