Esra Cengiz-Yanardag | CAD-CAM materials | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

 Prof. Esra Cengiz-Yanardag| CAD-CAM materials |Best Researcher Award

 Prof.  Esra Cengiz-YanardagMersin University,Turkey.

Prof. Dr. Esra Cengiz-Yanardağ is a distinguished academic at Mersin University in Turkey, specializing in Restorative Dentistry. She holds a DDS and PhD, and currently serves as a professor in the Department of Restorative Dentistry at Mersin University’s Faculty of Dentistry.Her research interests encompass dental materials, composite resins, restorative and aesthetic dentistry, clinical dentistry, dental caries, veneers, teeth whitening, dental education, and adhesion.Prof. Cengiz-Yanardağ has an extensive publication record, with 40 publications and 814 citations, reflecting her significant contributions to the field.

Publication Profile

Orcid

Scopus

Google scholar 

Education :

Professor Esra Cengiz Yanardağ completed her Bachelor’s degree in Dentistry from Ankara University, Faculty of Dentistry in 2006. She then pursued her Doctoral studies in Restorative Dentistry at Near East University, where she defended her thesis in 2012, focusing on the effects of saliva contamination on micro-shear bond strength in composite resins applied with different adhesive systems.

Experience :

With a strong background in restorative dentistry, Prof. Yanardağ has held various academic positions. She began as a Research Assistant at Near East University in 2007 and later became a Lecturer (PhD) in 2012. She was promoted to Assistant Professor in 2013 and continued in that role until 2016. In the same year, she joined Mersin University, Faculty of Dentistry, as an Assistant Professor, where she was later promoted to Associate Professor in 2017 and ultimately to Professor in 2022 in the Department of Restorative Dentistry.

In addition to her academic contributions, she has also taken on administrative roles, serving as Vice Dean of the Faculty of Dentistry at Mersin University (2016, 2019), a Faculty Board Member (2017), and the Bologna Coordinator for the faculty (2017).

Research Focus :

Prof. Yanardağ’s research primarily revolves around adhesive dentistry, composite resin materials, bleaching agents, and restorative techniques. Her studies explore the effects of different materials and treatment techniques on dental restorations, as well as the development of advanced restorative materials. She has been actively involved in research projects on bulk-fill composites, CAD/CAM materials, self-healing hybrid dental fillings, and diagnostic methods for early-stage caries detection.

Awards:

Young Researcher Award, Near East University, 2016 NEU Research Award, Near East University, 2010

Publication :

Clinical evaluation of Er, Cr: YSGG and GaAlAs laser therapy for treating dentine hypersensitivity: A randomized controlled clinical trial

Long-term effect of diode laser irradiation compared to sodium fluoride varnish in the treatment of dentine hypersensitivity in periodontal maintenance patients: a randomized …

Effectiveness of Er, Cr: YSGG laser on dentine hypersensitivity: a controlled clinical trial

The effect of surface treatments on the mechanical and optical behaviors of CAD/CAM restorative materials

Use of mineral trioxide aggregate in the treatment of invasive cervical resorption: a case report

The effect of home-bleaching application on the color and translucency of five resin composites

Efficacy of erbium, chromium-doped: yttrium, scandium, gallium, and garnet laser irradiation combined with resin-based tricalcium silicate and calcium hydroxide on direct pulp 

 Conclusion

Prof. Esra Cengiz Yanardağ is an exceptional researcher in restorative dentistry, with a strong academic background, impactful research, and leadership in funded projects. Her contributions to dental material innovation, adhesive bonding research, and mentorship make her a highly suitable candidate for the Best Researcher Award.

With further emphasis on international research collaborations, industry partnerships, and high-impact publications, she can further solidify her standing as a leading researcher in the field.

 

Chang Hyun Sohn | CFD | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Prof. Chang Hyun Sohn | CFD | Best Researcher Award

Professor, Kyungpook National University, South Korea.

Dr. Chang-Hyun Sohn is an accomplished academic and researcher with a distinguished career in mechanical engineering. His research in computational fluid dynamics, flow-induced vibration, and thermal-fluid flow phenomena has been recognized internationally, and his leadership roles in various engineering societies reflect his influential presence in the field. Dr. Sohn’s impressive publication record, patents, and awards underscore his innovative contributions to both academia and industry.

Publication Profile

Google Scholar

Education :

Dr. Chang-Hyun Sohn holds a Ph.D. in Mechanical Engineering from KAIST, South Korea, earned in 1991. He also completed his Master’s in Mechanical Engineering at KAIST in 1985 and obtained his Bachelor’s in Mechanical Engineering from Kyungpook National University, South Korea, in 1983. His strong educational foundation has significantly contributed to his long-standing career in academia and research.

Experience :

Dr. Sohn has been a professor at Kyungpook National University since 1994, where he is a key faculty member in the School of Mechanical Engineering. He served as the Team Manager for the Agency for Defense Development (ADD) in the development of small jet engines from 1991 to 1994. His academic influence extends internationally through his visiting professorships at the University of Cambridge (UK) in 1996-1997 and the University of Tennessee, Knoxville (USA) in 2005-2006. Dr. Sohn also held leadership roles at Kyungpook National University, including Vice Dean of the College of Engineering (2007-2008), Director of the Industrial-University Consortium Center (2007-2008), and Director of the Industrial Technology Support Hotline Center (2007-2008). Additionally, he was the President of the Faculty Assembly at Kyungpook National University (2012-2013) and held leadership positions in professional organizations such as the Korean Society of Mechanical Engineers (KSME) and the Korean Society of Automotive Engineers (KASE).

Research Focus :

Dr. Sohn’s research primarily focuses on thermal-fluid dynamics, computational fluid dynamics (CFD), and flow-induced vibrations. He has extensively studied the behavior of fluid flows under various thermal conditions and developed novel techniques for accurately measuring these flows using PIV. His work contributes to enhancing the understanding of flow phenomena in mechanical engineering, which is crucial for improving designs and systems in industries ranging from automotive to defense.

Awards:

Throughout his career, Dr. Sohn has received numerous awards recognizing his excellence in research and teaching. Notable honors include the Outstanding Paper Award from the Korean Society for Computational Fluid Engineering in 2010 and the Best Paper Award from the Korean Society of Mechanical Engineers in the same year. He also advised the winning team at the National Fluid Engineering Competition for University Students in 2010 and was selected as an Outstanding Portfolio Instructor at Kyungpook National University. Additionally, Dr. Sohn was invited as a speaker at prominent international conferences, including the 14th International Bhurban Conference on Applied Sciences & Technology (IBCAST) in 2016 and the 44th National Conference on Fluid Mechanics and Fluid Power (FMFP) in 2017.

Skills:

Dr. Sohn specializes in computational fluid dynamics (CFD) analysis of thermal-fluid flow phenomena. His expertise extends to the use of Particle Image Velocimetry (PIV) for measuring thermal-fluid flow and investigating flow-induced vibrations. These skills have led to significant contributions in both theoretical and experimental research, particularly in the field of thermal-fluid engineering.

 

 

Publication :

  • Investigating the Power Extraction of Applying Hybrid Pitching Motion on a Wing with Leading and Trailing Flaps
    • Authors: S. Saleh, C.H. Sohn
    • Journal: Actuators
    • Volume & Issue: 14 (2), 62
    • Year: 2025

 

  • Enhanced Power Extraction via Hybrid Pitching Motion in an Oscillating Wing Energy Harvester with Leading Flap
    • Authors: S. Saleh, C.H. Sohn
    • Journal: Energies
    • Volume & Issue: 17 (23), 6108
    • Year: 2024

 

  • Wetting performance analysis of porosity distribution in NMC111 layered electrodes in lithium-ion batteries using the Lattice Boltzmann Method
    • Authors: M. Abubaker, C.H. Sohn, H.M. Ali
    • Journal: Energy Reports
    • Volume & Issue: 12, 2548-2559
    • Year: 2024

 

  • Reduction of delivery pressure fluctuations in a gerotor pump
    • Authors: K. Nazir, C.H. Sohn
    • Journal: Journal of Mechanical Science and Technology
    • Volume & Issue: 38 (8), 4161-4166
    • Year: 2024

 

  • Numerically Investigating the Energy-Harvesting Performance of an Oscillating Flat Plate with Leading and Trailing Flaps
    • Authors: S. Saleh, C.H. Sohn
    • Journal: Energies
    • Volume & Issue: 17 (12), 3010
    • Year: 2024

 

  • Wetting characteristics of Li-ion battery electrodes: Impact of calendaring and current collector contact angle-A Lattice Boltzmann Method investigation
    • Authors: M. Abubaker, C.H. Sohn, H.M. Ali
    • Journal: Energy Reports
    • Volume & Issue: 11, 2333-2345
    • Year: 2024

 

  • Power Extraction Performance by a Hybrid Non-Sinusoidal Pitching Motion of an Oscillating Energy Harvester
    • Authors: S. Saleh, C.H. Sohn
    • Journal: Energies
    • Volume & Issue: 17 (11), 2451
    • Year: 2024

 

  • Understanding wetting behavior in electrode–electrolyte interface formation and its sensitivity to electrode-current collector interaction: a lattice Boltzmann method approach
    • Authors: M. Abubaker, C.H. Sohn, H.M. Ali
    • Journal: Journal of Thermal Analysis and Calorimetry
    • Year: 2024

 

Vahid Salarvand |Mechanical| Excellence in Research

Posted on by 21b4bddf87157652317827146367558f

Dr. Vahid Salarvand |Mechanical| Excellence in Research

Imam Khomeini International University,Iran

Dr. Vahid Salarvand is a distinguished academic and researcher affiliated with Imam Khomeini International University (IKIU) in Iran. He holds a significant role in his field, contributing to both teaching and research at the university. With a background in [insert specific field of study], Dr. Salarvand has garnered expertise in [mention specific research areas or specialties]. Throughout his career, he has been involved in various scholarly publications and academic collaborations, contributing to advancements in his field. Dr. Salarvand’s dedication to higher education and research has made him a respected figure at Imam Khomeini International University.

Summary:

Dr. Vahid Salarvand is a highly skilled and dedicated researcher in the fields of materials engineering and electrochemical performance. His academic background, combined with a rich set of technical skills and significant contributions to advanced materials synthesis, makes him a strong candidate for the “Excellence in Research” award. His ability to link fundamental research with industrial applications demonstrates a solid foundation for continued success and innovation.

 

Professional Profiles:

Scopus

🎓 Education :

Vahid Salarvand is currently pursuing a Ph.D. in Materials Engineering and Metallurgy at the Department of Materials Science and Engineering at Imam Khomeini International University, Iran, starting in 2022. His doctoral research focuses on materials science, and he is actively contributing to innovative work in the field. He completed his M.S. in Materials Engineering and Metallurgy at the same university from 2015 to 2018, where his thesis focused on the “Synthesis and characterization of nanostructure molybdenum nickel alloy produced by mechanical milling.” He also holds a B.S. in Mechanical Engineering, specializing in construction and production, from Saman Al-Hajj Technical and Vocational School, Mashhad, Iran (2013-2015).

 

🏢 Experience:

Vahid Salarvand has significant professional experience in the industry, having worked as a Quality Control Manager at Carno Ideal Arman Company from 2020 to 2023. During this role, he oversaw the quality assurance processes, ensuring that production standards were met, which aligns with his technical and engineering expertise.

🛠️Skills:

Synthesis of materials using hydrothermal methods.,Proficient in additive manufacturing using Fused Deposition Modeling (Ender 5) and Digital Light Processing (Anycubic Photon M3 Max).,Skilled in light microscopy, X-ray diffraction (XRD), and metallography (mounting and polishing).,Experienced in heat treatment using Carbolite Tube Furnace (CTF 3 1600) for material processing.

 

Research Focus :

His research focuses on the synthesis and characterization of advanced materials for applications in energy systems, corrosion resistance, and electrocatalysis. His work in electrochemical processes, especially for hydrogen evolution reactions and water splitting, reflects his deep understanding of materials science.

 

🔬Awards:

Vahid’s notable accomplishments include an international patent for an invention entitled “NiMo-MoO2 catalyst synthesis process” (Class B01J 37.03 C22C 1.05). He has also conducted an industrial thesis under the supervision of the Nano Wealth Development Headquarters, which reflects his strong collaboration with industry and research communities.

Conclusion:

Dr. Salarvand’s strengths in both academic and industrial research, along with his passion for advancing materials science, align well with the criteria for “Excellence in Research.” By furthering his collaborations and seeking additional funding opportunities, he could significantly increase his impact. Based on his current achievements and future potential, he stands out as a deserving candidate for the award, showcasing a strong commitment to innovation and research excellence.

 Publications:

  • Microstructure, mechanical properties, and corrosion resistance of dissimilar weld joints between SS304 and Inconel 600 welded using gas tungsten arc welding
    • Authors: Salarvand, V., Ahmadian, F., Torabpour, M., Mostafaei, A., Brabazon, D.
    • Journal: International Journal of Pressure Vessels and Piping
    • Year: 2024
    • Citations: 0

 

  • Facile hydrothermal synthesis of combined MoSe2PS nanostructures on nickel foam with superior electrocatalytic properties for hydrogen evolution reaction
    • Authors: Salarvand, V., Abedini Mohammadi, M., Yousefifar, A., Yazdi, M.S., Mostafaei, A.
    • Journal: International Journal of Hydrogen Energy
    • Year: 2023
    • Citations: 9

 

  • In-situ hydrothermal synthesis of NiCo(X)Se compound on nickel foam for efficient performance of water splitting reaction in alkaline media
    • Authors: Salarvand, V., Abedini Mohammadi, M., Ahmadian, F., Saghafi Yazdi, M., Mostafaei, A.
    • Journal: Journal of Electroanalytical Chemistry
    • Year: 2022
    • Citations: 10

 

  • Microstructure and corrosion evaluation of as-built and heat-treated 316L stainless steel manufactured by laser powder bed fusion
    • Authors: Salarvand, V., Sohrabpoor, H., Mohammadi, M.A., Mostafaei, A., Brabazon, D.
    • Journal: Journal of Materials Research and Technology
    • Year: 2022
    • Citations: 21

 

  • Production and characterization of high-performance cobalt–nickel selenide catalyst with excellent activity in HER
    • Authors: Ahmadian, F., Salarvand, V., Saghafi, M., Noghani, M.T., Yousefifar, A.
    • Journal: Journal of Materials Research and Technology
    • Year: 2021
    • Citations: 7

 

  • Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion
    • Authors: Sohrabpoor, H., Salarvand, V., Lupoi, R., Choi, C.-H., Brabazon, D.
    • Journal: Journal of Materials Research and Technology
    • Year: 2021
    • Citations: 33

 

  • Synthesis, Characterization, and Investigation of Hydrogen Evolution Activity of Ni-Mo/Al2O3 Composite
    • Authors: Salarvand, V., Mahmoodi, H., Ahmadian, F., Saghafi, M., Noghani, M.T.
    • Journal: ChemistrySelect
    • Year: 2020
    • Citations: 4

 

  • Investigation of microstructure and corrosion resistance of AISI 304 stainless steel joint with ER308 and ERNiCr-3 filler metals by GTAW
    • Authors: Jafarzadegan, M., Ahmadian, F., Salarvand, V., Kashkooli, S.
    • Journal: Metallurgical Research and Technology
    • Year: 2020
    • Citations: 3

 

  • Hydrogen evolution activity of NiMo-MoO2 produced by mechanical milling
    • Authors: Salarvand, V., Saghafi, M., Noghani, M.T.
    • Journal: Journal of Ultrafine Grained and Nanostructured Materials
    • Year: 2019
    • Citations: 5

 

  • Charge storage properties of mixed ternary transition metal ferrites MZnFe oxides (M = Al, Mg, Cu, Fe, Ni) prepared by hydrothermal method
    • Authors: Saghafi, M., Hosseini, S.A., Zangeneh, S., Vahedi, S., Mohajerzadeh, S.
    • Journal: SN Applied Sciences
    • Year: 2019
    • Citations: 17

 

Ivana Bolanča Mirković |Industrial engineering| Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Prof. Ivana Bolanča Mirković |Industrial engineering| Best Researcher Award

University of Zagreb Faculty of Graphic Arts,Croatia

Prof. Ivana Bolanča Mirković is a distinguished academic at the University of Zagreb, Faculty of Graphic Arts, Croatia. With expertise in graphic arts and technology, she has contributed significantly to the field through both teaching and research. Prof. Bolanča Mirković is known for her innovative approaches in the integration of graphic design with emerging technologies. She has been instrumental in advancing the study of digital media and its application in graphic arts. Throughout her career, she has published numerous works and collaborated with various institutions to promote the development of graphic technologies. Her dedication to education and research has made her a respected figure in her field.

Summary:

The candidate is an outstanding contender for the Research for Young Scientist Award. Their strong educational background, entrepreneurial ventures, innovative research in AI, virtual reality, and machine learning, and significant academic contributions demonstrate exceptional promise. They have proven to be a pioneer at the intersection of architecture and emerging technologies, driving both academic discourse and practical application.

 

Professional Profiles:

 Scopus

🎓 Education :

Professor Ivana Bolanča Mirković was born on June 7, 1976, in Zagreb, Croatia. She completed her secondary education at the High School of Natural Sciences and Mathematics and continued her academic journey at the Faculty of Natural Sciences and Mathematics of the University of Zagreb, where she graduated in 2002 with a thesis on “Determination of elements in drinking water by atomic spectroscopy and complexometry.” After graduation, she pursued further studies at the Faculty of Graphics, obtaining a master’s degree in Graphic Engineering in 2005, with a thesis titled “Mechanisms of deinking in the function of the ageing of prints.” She later earned her Ph.D. in 2007 with a dissertation entitled “Ecologically more favourable offset inks and mechanisms of deinking of prints.”

 

🏢 Experience:

Professor Bolanča Mirković’s career at the Faculty of Graphics began in 2002 when she was employed as a research assistant at the Department of Environmental Protection. Her involvement in the field of environmental science and technology grew as she participated in various scientific projects and became a recognized expert in her areas of study. Over the years, she has held several prestigious positions, including the editor-in-chief of Acta Graphica since 2022 and leadership roles in multiple scientific committees and projects.

🛠️Skills:

Professor Bolanča Mirković is highly skilled in environmental research, with expertise in using spectroscopic techniques and chemometric methods for ecological applications. She is also proficient in the study of materials and processes involved in graphic reproduction, particularly in the context of sustainability. Furthermore, she has developed strong organizational and leadership abilities through her roles in scientific committees and her involvement in international collaborations

 

Research Focus :

Professor Bolanča Mirković’s primary research interests lie in ecology, industrial ecology, and the application of spectroscopic and chemometric methods to environmental science. Her work also covers the study of paper recycling mechanisms and the aging processes of materials like paints, paper, and prints. She has made significant contributions to sustainable practices in the printing industry and the environmental aspects of graphic materials. Additionally, she has been involved in several research projects aimed at developing more ecologically friendly graphic materials and advancing knowledge in environmental protection.

 

🔬Awards:

Professor Bolanča Mirković has been honored with numerous awards and recognitions throughout her career. Since May 20, 2019, she has been an associate member of the Croatian Academy of Technical Sciences in the Department of Graphic Engineering. In addition to her academic contributions, she has been a key figure in international scientific conferences, serving as a member and president of various program and review committees, particularly in the fields of printing, design, and graphic communications. Her academic achievements and contributions to science have earned her considerable respect in both Croatian and international research communities.

 

Conclusion:

Given their innovative work and leadership in education, this individual shows considerable potential for continued contributions to scientific and technological fields. However, expanding their publication portfolio and focusing on a more unified research direction could enhance their future impact. Overall, the candidate is a fitting nominee for the Research for Young Scientist Award, poised to shape the future of architecture, technology, and design.

 

 Publications:

  • The Influence of the Production Stages of Cardboard Pharmaceutical Packaging on the Circular Economy
    • Authors: Klemenčić, M., Bolanča Mirković, I., Bolf, N.
    • Journal: Sustainability (Switzerland)
    • Year: 2023
    • Citation Count: 1

 

  • Storage of Documents as a Function of Sustainability
    • Authors: Bolanča Mirković, I., Bolanča, Z.
    • Journal: Sustainability (Switzerland)
    • Year: 2023
    • Citation Count: 1

 

  • Technical Characteristics of Incunabulum in Europe
    • Authors: Bolanča, S., Bolanča Mirković, I., Pučić, I.
    • Journal: Tehnicki Glasnik
    • Year: 2023
    • Citation Count: 0

 

  • The Efficiency of the Separation of Impurities from Cellulose Pulp Obtained from Pharmaceutical Laminated Cardboard Packaging
    • Authors: Klemenčić, M., Bolanča Mirković, I., Bolf, N.
    • Journal: Tehnicki Vjesnik
    • Year: 2022
    • Citation Count: 0

 

  • Ecologically Sustainable Printing: Aspects of Printing Materials
    • Authors: Bolanča Mirković, I., Medek, G., Bolanča, Z.
    • Journal: Tehnicki Vjesnik
    • Year: 2019
    • Citation Count: 5

 

  • Recycling Optimisation of the Electrophotographic Prints
    • Authors: Bolanča Mirković, I., Majnarić, I., Bolanča, S.
    • Conference: Proceedings of the International Conference of DAAAM Baltic “Industrial Engineering”
    • Year: 2012
    • Pages: 119–124
    • Citation Count: 3

 

Jiangbo Xu | Slope engineering |Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Mr. Jiangbo Xu | Slope engineering |Best Researcher Award

Mrs.Jiangbo Xu,Chang’an University,China

Mrs. Jiangbo Xu is a distinguished academic and researcher at Chang’an University in China. With a focus on advancing research in her field, she has made notable contributions to the academic community through her work in engineering and technology. At Chang’an University, Mrs. Xu engages in pioneering studies and development, driving innovations that impact both academia and industry. Her dedication to research excellence and educational advancement has positioned her as a respected figure in her discipline.

Summary:

Mrs. Jiangbo Xu is an accomplished researcher with a strong foundation in geotechnical engineering. Her work combines technological innovation with sustainable practices, addressing real-world challenges in infrastructure and environmental protection. Through her role as a doctoral supervisor and her extensive research output, she contributes both to academic knowledge and to practical advancements in her field. Her leadership in projects backed by major research grants highlights her capabilities in driving impactful studies, and her publications affirm her standing as a respected researcher in geotechnical engineering.

Professional Profiles:

 Scopus

🎓 Education :

Ph.D. in Geological Engineering,Institute of Geology and Geophysics, Chinese Academy of Sciences,Advisor: Professor Wu Faquan
2008.09–2014.07,Master’s in Geotechnical Engineering,Wuhan Institute of Rock and Soil Mechanics, Chinese Academy of Sciences
Advisors: Professors Zheng Yingren and Feng Xiating
2008.09–2011.07,Bachelor’s in Civil Engineering,China University of Geosciences (Beijing),2004.09–2008.07

🏢 Experience:

Associate Professor in Geotechnical Engineering | 2018.11–Present,Doctoral Supervisor | 2020.01–Present,Master’s Supervisor in Geotechnical Engineering | 2017.11–Present,Lecturer in Geotechnical Engineering | 2014.07–2018.11

🛠️Skills:

Geotechnical Engineering: Expertise in soil mechanics, rock mechanics, slope stability, and geotechnical monitoring.,Digital Perception Systems: Development of intelligent monitoring systems for geotechnical engineering, focusing on applications in infrastructure like tunnels and slopes.,Numerical Simulation: Proficient in finite element analysis, numerical simulation techniques, and computational modeling of geotechnical issues.,Environmental Impact and Carbon Emission: Specialized in carbon emissions reduction strategies for infrastructure projects, particularly highway subgrade slopes and slope ecological protection.,Research and Analysis: Strong analytical skills in geotechnical project design, materials assessment, and hazard identification.

Research Focus :

2024,Application of Permeation Crystallization Materials in Concrete Crack Repair | Shaanxi Provincial Department of Science and Technology,Digital Perception and Intelligent Decision-Making System for Geotechnical Engineering | Shaanxi Province “Scientist + Engineer” Project,Slope Digital Collaborative Perception and Intelligent Decision-making System | Xi’an Science and Technology Bureau,2023,Ecological Protection of Highway Subgrade Slopes with Carbon Emission Algorithms | Sichuan Communications Investment Design & Consultation Research Institute Co., Ltd.,Rocky Collapse Hazards Monitoring at Tunnel Entrances | Shaanxi Provincial Department of Transportation2022,Prevention Technologies for Railway Tunnel Defects | China Railway First Survey and Design Institute Group Co., Ltd.

🔬Awards:

Shaanxi Provincial Science and Technology Award for advancements in geotechnical digital monitoring systems.,Chang’an University Outstanding Research Award for contributions to geotechnical engineering education and innovation.

Conclusion:

Mrs. Jiangbo Xu is a strong candidate for the Research for Best Researcher Award. Her achievements in advancing sustainable geotechnical engineering and her contributions to knowledge and practice make her well-suited for this recognition. With opportunities to expand her international influence and further diversify her research, her career trajectory indicates continued and growing impact in her field.

Publications :

  • Concrete crack recognition and geometric parameter evaluation based on deep learning
    • Authors: Shaowei, W., Jiangbo, X., Xiong, W., Zixuan, Z., Xinyu, C.
    • Journal: Advances in Engineering Software
    • Year: 2025

 

  • Experimental study on seismic characteristics of slope supported by long-short composite anti-slide piles
    • Authors: Lai, J., Liu, Y., Liu, Y., Jiangbo, X.
    • Journal: Scientific Reports
    • Year: 2024

 

  • Study on the correlation between pore structure characterization and early mechanical properties of foamed concrete based on X-CT
    • Authors: Zhao, D., Xu, J., Han, Z., Liu, Y., Yang, X.
    • Journal: Construction and Building Materials
    • Year: 2024

 

  • Research on the method of determining landslide threshold based on accelerating point dynamic identification
    • Authors: Hou, X., Liu, Y., Xu, J., Chen, S., Zhang, X.
    • Journal: Landslides
    • Year: 2024

 

  • Influence of phyllite aspect ratio under static and dynamic compression
    • Authors: Xu, J., Yu, Y., Sun, G., Lai, J., Wang, L.
    • Journal: Chongqing Daxue Xuebao/Journal of Chongqing University
    • Year: 2024
  • Ground Deformation of Shield Tunneling through Composite Strata in Coastal Areas
    • Authors: Wu, X., Xu, J., Wang, S., Qiao, W., Zeng, X.
    • Journal: Buildings
    • Year: 2024
  • Parallel finite layer method for land subsidence and its homotopy parameter inversion
    • Authors: Wang, S., Xu, J., Xu, J.
    • Journal: Environmental Modelling and Software
    • Year: 2024

 

  • Study on Slope Monitoring and Stability Based on Bolt–Cable Combined Support
    • Authors: Liu, Y., Lai, J., Xu, J.
    • Journal: Buildings
    • Year: 2024

 

  • Numerical Study on Permeability of Reconstructed Porous Concrete Based on Lattice Boltzmann Method
    • Authors: Zhao, D., Xu, J., Wang, X., Zhang, J., Sun, R.
    • Journal: Buildings
    • Year: 2024

 

  • Investigation into the degradation patterns of the physical and mechanical characteristics of phyllite within a hydrothermal environment
    • Authors: Xu, J., Zeng, X., Sun, H., Zhao, D., Qi, Y.
    • Journal: Bulletin of Engineering Geology and the Environment
    • Year: 2024

 

Henda Mahmoudi | Intelligent control systems | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Dr. Henda Mahmoudi | Intelligent control systems| Best Researcher Award

Dr. Henda Mahmoudi, ICBA, United Arab Emirates.

Dr. Henda Mahmoudi is a distinguished researcher at the International Center for Biosaline Agriculture (ICBA) in the United Arab Emirates. With a focus on plant physiology and stress tolerance, she has contributed significantly to the understanding of how various environmental factors, including salinity and nutrient deficiencies, affect crop performance. Dr. Mahmoudi‘s work emphasizes sustainable agricultural practices and the development of resilient plant varieties, particularly in arid and saline conditions. Her research has implications for improving food security and agricultural sustainability in challenging environments.

Summary:

Dr. Henda Mahmoudi’s contributions to plant physiology and sustainable agriculture make her an exemplary candidate for the Research for Best Researcher Award. Her extensive research on the physiological responses of crops to environmental stresses has significant implications for improving food security in arid regions.

 

Professional Profiles:

Google Scholar

 

🎓 Education :

Dr. Mahmoudi earned her Ph.D. in Plant Biology from the Faculty of Sciences of Tunis and the National Institute of Scientific and Technique Research, Tunisia, focusing on the adaptation mechanisms of legumes to iron deficiency. She holds a Master Diploma in Plant Physiology and a Master’s degree in Natural Science from Tunis.

🏢 Experience:

Since 2009, she has held various positions at the International Center for Biosaline Agriculture in Dubai, UAE, progressing from visiting scientist to plant physiologist. Her earlier research roles included significant contributions to the understanding of biochemical mechanisms in legumes under abiotic stress conditions.

🛠️Skills:

Henda Mahmoudi, Ph.D., is a highly skilled plant physiologist with extensive experience in plant eco-physiology, biotechnology, water conservation, soil improvement, and salinity management. Her laboratory expertise includes soil, water, and plant analysis, leaf gas exchange measurement, and advanced biochemical techniques such as western blot analysis and enzymatic activity assessment.

Research Focus :

His research focuses on optimal design and performance analysis of control systems, particularly the application of fractional order control techniques in unstable processes. He aims to enhance stability and performance in engineering systems through innovative controller design.

 

Awards:

Her research has received funding from prestigious organizations, allowing her to spearhead significant projects aimed at enhancing agricultural sustainability in arid regions. Dr. Mahmoudi is recognized for her contributions to advancing agricultural practices, particularly through her work in developing user-friendly applications for smallholder farmers.

Conclusion:

Given her outstanding achievements, commitment to sustainability, and potential for further impact, Dr. Mahmoudi is highly deserving of the Research for Best Researcher Award. Her ongoing work promises to advance agricultural resilience and food security, addressing some of the most pressing challenges in modern agriculture. Recognizing her efforts through this award would not only honor her contributions but also inspire continued innovation in the field.

Publications :

                         

  • Yousfi, S., Mahmoudi, H., Abdelly, C., & Gharsalli, M. (2007). Effect of salt on physiological responses of barley to iron deficiency. Plant Physiology and Biochemistry, 45(5), 309-314.
  • Mbarki, S., Labidi, N., Mahmoudi, H., Jedidi, N., & Abdelly, C. (2008). Contrasting effects of municipal compost on alfalfa growth in clay and in sandy soils: N, P, K, content and heavy metal toxicity. Bioresource Technology, 99(15), 6745-6750.
  • Ksouri, R., Debez, A., Mahmoudi, H., Ouerghi, Z., Gharsalli, M., & Lachaâl, M. (2007). Genotypic variability within Tunisian grapevine varieties (Vitis vinifera L.) facing bicarbonate-induced iron deficiency. Plant Physiology and Biochemistry, 45(5), 315-322.
  • Mahmoudi, H., Ksouri, R., Gharsalli, M., & Lachaâl, M. (2005). Differences in responses to iron deficiency between two legumes: lentil (Lens culinaris) and chickpea (Cicer arietinum). Journal of Plant Physiology, 162(11), 1237-1245.
  • Mahmoudi, H., Labidi, N., Ksouri, R., Gharsalli, M., & Abdelly, C. (2007). Differential tolerance to iron deficiency of chickpea varieties and Fe resupply effects. Comptes Rendus Biologies, 330(3), 237-246.
  • Ali, S., Tyagi, A., Park, S., Mir, R. A., Mushtaq, M., Bhat, B., Mahmoudi, H., & Bae, H. (2022). Deciphering the plant microbiome to improve drought tolerance: mechanisms and perspectives. Environmental and Experimental Botany, 201, 104933.
  • Ali, S., Mir, R. A., Tyagi, A., Manzar, N., Kashyap, A. S., Mushtaq, M., Raina, A., & others. (2023). Chromium toxicity in plants: signaling, mitigation, and future perspectives. Plants, 12(7), 1502.
  • Tyagi, A., Ali, S., Ramakrishna, G., Singh, A., Park, S., Mahmoudi, H., & Bae, H. (2023). Revisiting the role of polyamines in plant growth and abiotic stress resilience: mechanisms, crosstalk, and future perspectives. Journal of Plant Growth Regulation, 42(8), 5074-5098.
  • Labidi, N., Mahmoudi, H., Dorsaf, M., Slama, I., & Abdelly, C. (2009). Assessment of intervarietal differences in drought tolerance in chickpea using both nodule and plant traits as indicators. Journal of Plant Breeding and Crop Science, 1(4), 80-86.
  • Nefissi Ouertani, R., Abid, G., Karmous, C., Ben Chikha, M., Boudaya, O., & others. (2021). Evaluating the contribution of osmotic and oxidative stress components on barley growth under salt stress. AoB Plants, 13(4), plab034.
  • Nefissi Ouertani, R., Arasappan, D., Abid, G., Ben Chikha, M., Jardak, R., & others. (2021). Transcriptomic analysis of salt-stress-responsive genes in barley roots and leaves. International Journal of Molecular Sciences, 22(15), 8155.
  • Shahid, S. A., Abdelfattah, M. A., Omar, S. A. S., Harahsheh, H., Othman, Y., & others. (2010). Mapping and monitoring of soil salinization remote sensing, GIS, modeling, electromagnetic induction and conventional methods–Case studies. Proceedings of the International Conference on Soils and Groundwater.
  • Hidri, R., Mahmoud, O. M. B., Zorrig, W., Mahmoudi, H., Smaoui, A., Abdelly, C. (2022). Plant growth-promoting rhizobacteria alleviate high salinity impact on the halophyte Suaeda fruticosa by modulating antioxidant defense and soil biological properties. Frontiers in Plant Science, 13, 821475.
  • Tabatabaei, I., Alseekh, M., Shahid, M., Leniak, E., Wagner, M., Mahmoudi, H., & others. (2022). The diversity of quinoa morphological traits and seed metabolic composition. Scientific Data, 9(1), 323.
  • Shahid, S. A., Mahmoudi, H. (2014). National strategy to improve plant and animal production in the United Arab Emirates. In Soil and Water Resources (Annexes, 113-131).

                                                                                                                                                                                                                                                                                                                                                                                     

Erdal Cokmez | Computer technology | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Dr. Erdal Cokmez | Computer technology | Best Researcher Award

Dr. Erdal Cokmez, Dicle University, Turkey.

Dr. Erdal Cokmez is a faculty member at Dicle University in Turkey, where he focuses on [specific field or area of expertise]. With extensive experience in research interests,  he has contributed significantly to his awards. Dr. Cokmez is dedicated to advancing education and research, fostering innovation, and inspiring students in his field.

Summary:

Dr. Cokmez‘s work exemplifies a blend of rigorous research and a passion for education. His contributions to the field of electrical engineering, particularly in control systems, position him as a leader in technological advancements. His ability to inspire students and colleagues alike underscores his influence in the academic community.

 

Professional Profiles:

Google Scholar

 

🎓 Education :

Dr. Cokmez earned his Ph.D. in Electrical-Electronic Engineering from Dicle University in 2024, with a focus on controller design and performance analysis. He completed his Master’s degree at the same institution in 2018, where he researched fractional order PI controller design methods. His Bachelor’s degree was obtained from Akdeniz University in 2013.

🏢 Experience:

As a Research Assistant in the Department of Electrical-Electronic Engineering at Dicle University since 2015, Dr. Cokmez has contributed to various research projects and academic publications. He is currently the Co-head of the Department, overseeing departmental activities and initiatives.

🛠️Skills:

Dr. Erdal Cokmez possesses expertise in control systems design, particularly in integer and fractional order controllers. He is skilled in performance analysis and optimization for various engineering applications, utilizing advanced analytical and computational methods.

Research Focus :

His research focuses on optimal design and performance analysis of control systems, particularly the application of fractional order control techniques in unstable processes. He aims to enhance stability and performance in engineering systems through innovative controller design.

 

Awards:

Dr. Cokmez has received recognition for his contributions to engineering research, including publications in prestigious international journals and presentations at significant conferences, showcasing his commitment to advancing the field.

 Conclusion:

Given his remarkable research contributions, commitment to education, and potential for further interdisciplinary engagement, Dr. Erdal Cokmez is a highly suitable candidate for the Best Researcher Award. His achievements not only advance the field of computer technology but also inspire future generations of engineers and researchers.

Publications :

                         

  • E. Cokmez, S. Atiç, F. Peker, I. Kaya, “Fractional-order PI controller design for integrating processes based on gain and phase margin specifications,” IFAC-PapersOnLine, 51 (4), 751-756, 2018.

 

  • S. Atiç, E. Cokmez, F. Peker, I. Kaya, “PID controller design for controlling integrating processes with dead time using generalized stability boundary locus,” IFAC-PapersOnLine, 51 (4), 924-929, 2018.

 

  • E. Çökmez, I. Kaya, “An analytical solution of fractional order PI controller design for stable/unstable/integrating processes with time delay,” Turkish Journal of Electrical Engineering and Computer Sciences, 31 (3), 626-645, 2023.

 

  • F. Peker, I. Kaya, E. Cokmez, S. Atiç, “Cascade control approach for a cart inverted pendulum system using controller synthesis method,” 26th Mediterranean Conference on Control and Automation (MED), 1-6, 2018.

 

  • E. Cokmez, I. Kaya, “Optimal design of I-PD controller for disturbance rejection of time delayed unstable and integrating-unstable processes,” International Journal of Systems Science, 55 (8), 1610-1638, 2024.

 

  • I. Kaya, E. Cokmez, “Integral-proportional derivative controller tuning rules obtained from optimum responses for set-point tracking of unstable processes with time delay,” Transactions of the Institute of Measurement and Control, 45 (7), 1351-1366, 2023.

 

  • E. Cokmez, I. Kaya, “Stability boundary locus for unstable processes with time delay under fractional-order PI controllers,” 6th International Conference on Control Engineering & Information Technology, 2018.

 

  • E. Cokmez, I. Kaya, “Fractional order PI-PD controller design for time delayed processes,” Computers and Electrical Engineering, 120, 109776, 2024.

 

  • İ. Kaya, E. Çökmez, “Kesir dereceli PI denetleyici ile kesir dereceli kararsız zaman gecikmeli sistemler için kararlılık bölgelerinin elde edilmesi,” Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi, 9 (2), 625-636, 2018.

 

  • E. Cokmez, I. Kaya, “On Fractional Order PI Controller: An Analysis On Integer Order Systems with Integral Performance Criteria,” International Conference on Engineering Technologies, 344-349, 2017.

                                                                                                                                                                                                                                                                                                                                                                                     

AUDEL SANTOS BELTRAN| Metal Matrix | Best Paper Award

Posted on by 21b4bddf87157652317827146367558f

Dr.AUDEL SANTOS BELTRAN| Metal Matrix | Best Paper Award

Dr, AUDEL SANTOS BELTRAN,UNIVERSIDAD TECNOLOGICA DE CHIHUAHUA SUR, Mexico

Dr. Audel Santos Beltrán is a distinguished academic and researcher at Universidad Tecnológica de Chihuahua Sur, Mexico. He has contributed significantly to his field, with a focus on advancing technological innovations and academic excellence. Dr. Beltrán is known for his commitment to education and research, helping to shape future professionals through his work in technology and applied sciences. His dedication to the academic community continues to inspire students and colleagues alike.

Summary:

Dr. Audel Santos Beltrán is a distinguished researcher and academic with significant contributions to materials science, particularly in nanocomposites, microalloyed steels, and advanced manufacturing processes. His leadership roles, participation in the development of patents, extensive teaching experience, and numerous technological research projects position him as a strong candidate for the Research for Best Paper Award. His work demonstrates a clear blend of theoretical depth and practical innovation, contributing to both academic knowledge and industrial applications.

Professional Profiles:

Scopus

🎓 Education :

Doctorate in Materials Science
Thesis Title: “Solid-State Synthesis of Aluminum-Based Nanocomposites and Microstructural and Mechanical Analysis”
Recognition for academic excellence.,Master’s Degree in Materials Science,Thesis Title: “Effect of C and Mn on the Activation Energy for Low-C Microalloyed Steels Subjected to Hot Deformation”,Mechanical Engineer in Manufacturing Design,Thesis Title: “Instrumentation and Control Practices Manual Applied to a Generator Powered by a Turbine”

🏢 Experience:

Full-Time Professor, Technological University of Chihuahua South (May 2012 – present),Led courses in the Mechatronics and Nanotechnology program, including Mechanical Systems, Metrology, Hydraulics, Pneumatics, Robotics, Kinematics, and Material Science. Oversaw the certification of Higher University Technician (TSU) programs in Mechatronics and Mechatronics Engineering by CACEI as the Head of the Nanotechnology and Mechatronics Program.,Adjunct Professor, UTEL University (September 2017 – present),Taught undergraduate and master’s courses, including Operations Research, Materials Technology, Manufacturing Systems, and Innovation Methodology.,Adjunct Professor, Chihuahua Institute of Technology II (September 2023 – June 2024),Focused on courses in Industrial Drawing, Mechanisms, Metrology, and Standardization.,Adjunct Professor, University of the Valley of Mexico (January 2017 – June 2021)
Lectured on Mechanism and Machine Design, Process Automation, and Technological Innovation.,Professor-Researcher, Autonomous University of Zacatecas (August 2007 – April 2011)
Directed courses in the postgraduate program for Materials Science, including Material Characterization and Experimental Design.

🛠️Skills:

Expertise in SolidWorks, KUKA Robot Operation and Programming, Frequency Converters, and UR Core Training for robotic arms. Strong background in nanomaterials, mechanical systems, and industrial automation. Proven experience in developing teaching prototypes and supervising advanced research projects.

Research Focus :

Research interests center on nanotechnology, materials science, and mechatronics, particularly the solid-state synthesis of aluminum-based nanocomposites. Research explored microstructural changes and their impact on the mechanical properties of materials under hot deformation conditions. Contributed to research in advanced materials, nanofluids, and mechanical testing, publishing in international journals and presenting at national and international conferences. As a member of the National System of Researchers (SNI), Level I, and a recipient of the PRODEP Profile distinction, research contributions have been recognized for advancing materials science and engineering. Collaborated with leading institutions such as CIMAV on research committees and evaluation panels to drive materials technology innovations.

🔬Awards:

National System of Researchers (SNI), Level I
PRODEP Profile distinction
Recognition for Academic Excellence
Best Technical Report Award at the Freescale Cup competition

Conclusion:

Dr. Beltrán’s body of work aligns well with the criteria for the Research for Best Paper Award. His combination of impactful research, academic leadership, and innovative technological advancements makes him a deserving candidate. While furthering his global reach and increasing high-impact publications would bolster his candidacy, his existing accomplishments demonstrate a significant contribution to materials science and mechatronics. Therefore, he stands as a commendable nominee for this award.

Publications :

  • Effect of Rare Earth Elements Addition and Sintering Conditions on the Microstructure and Microhardness of Inconel 718
    • Authors: Medrano-Prieto, H.M., Santos-Beltrán, A., Gallegos-Orozco, V., Castro-Carmona, J.S., Martínez-Sánchez, R.
    • Journal: Metallography, Microstructure, and Analysis
    • Year: 2024
    • Citations: 0

 

  • Al-Graphite Nanostructures Composites Fabricated by High-Frequency Induction Sintering Method
    • Authors: Gallegos-Orozco, V., Santos-Beltrán, A., Santos-Beltrán, M.M., Ronquillo-Ornelas, I., Martínez-Sánchez, R.
    • Journal: Microscopy and Microanalysis (Official Journal of Microscopy Society of America, Microbeam Analysis Society, Microscopical Society of Canada)
    • Year: 2023
    • Citations: 0

 

  • Effect of HIP and Mixture of Rare Earth Elements on the Microstructure and Mechanical Performance of Aged Nanostructured Inconel 718
    • Authors: Medrano-Prieto, H.M., Santos-Beltran, A., Gallegos-Orozco, V., Camacho-Montes, H., Martínez-Sánchez, R.
    • Journal: Microscopy and Microanalysis
    • Year: 2023
    • Citations: 0

 

  • Al-Li-Cu Alloy Preparation by High-energy Ball Milling Sintered Using High-Frequency Induction Heating
    • Authors: Mendoza-Duarte, J.M., Ruiz-Esparza-Rodriguez, M.A., Santos-Beltrán, A., Estrada-Guel, I., Martínez-Sánchez, R.
    • Journal: Microscopy and Microanalysis
    • Year: 2023
    • Volume: 29, Issue 1
    • Pages: 576–577
    • Citations: 0

 

  • Preparation and Study of an Expanded Graphite Obtained Through Torch and Microwave-assisted Heating
    • Authors: Mendoza-Duarte, J.M., Pizá-Ruiz, P., Santos-Beltrán, A., Estrada-Guel, I., Martínez-Sánchez, R.
    • Journal: Microscopy and Microanalysis
    • Year: 2023
    • Pages: 176–177
    • Citations: 0

 

  • Effect of Process Parameters on the Graphite Expansion Produced by a Green Modification of the Hummers Method
    • Authors: Tarango-Rivero, G., Mendoza-Duarte, J.M., Santos-Beltrán, A., Rocha-Rangel, E., Martínez-Sánchez, R.
    • Journal: Molecules
    • Year: 2022
    • Citations: 4

 

  • Phase Composition and its Effect on the Mechanical Performance of an AlCoCrFeNiTi High-Entropy Alloy
    • Authors: Estrada-Guel, I., Rodríguez-González, C.A., Hernández-Paz, J., Romero-Romero, M., Gómez-Esparza, C.D.
    • Journal: Materials Letters
    • Year: 2022
    • Citations: 4

 

  • Dispersion of Graphite, Ceria, and Nanohybrid Ceria-Graphite in the 6063 Aluminum Alloy through Powder Metallurgy
    • Authors: Camacho-Rios, M.L., Garay-Reyes, C.G., Lardizabal-Gutiérrez, D., Gómez-Esparza, C.D., Martínez-Sánchez, R.
    • Journal: Materials Chemistry and Physics
    • Year: 2022
    • Citations: 4

 

Mr . Francisco José Martínez Peral | Computer aided machine design | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Mr . Francisco José Martínez Peral | Computer aided machine design | Best Researcher Award

Mr . Francisco José Martínez Peral ,Universidad Miguel Hernández de Elche,Spain

Mr. Francisco José Martínez Peral is an esteemed faculty member at the Universidad Miguel Hernández de Elche in Spain. With a strong academic background and extensive experience in his field, Mr. Martínez Peral has made significant contributions to both teaching and research. His areas of expertise include  and he has been actively involved in numerous research projects and publications. Mr. Martínez Peral is dedicated to advancing knowledge and fostering innovation within his discipline, making him a respected figure in the academic community.

 

Professional Profiles:

Scopus

Education :

Bachelor’s Degree in Industrial Electronic and Automatic Engineering
Universidad Miguel Hernández de Elche,September 24, 2021,Average Grade: 7.41,Honors in Technical Drawing, Electronic Systems Design, and State Space Control,Master’s Degree in Robotics,Universidad Miguel Hernández de Elche,July 15, 2022,Average Grade: 9.00,Perfect Grades (10) in Bachelor’s and Master’s Theses

Experience:

,Average Grade: 7.41,Honors in Technical Drawing, Electronic Systems Design, and State Space Control,Bachelor’s Degree in Industrial Electronic and Automatic Engineering,Universidad Miguel Hernández de Elche,September 24, 2021,Master’s Degree in Robotics,Universidad Miguel,Hernández de Elche,July 15, 2022,Average Grade: 9.00,Perfect Grades (10) in Bachelor’s and Master’s Theses

Skills:

Robotics: Programming ABB robots, designing robotic stations,Computer Vision: Experience with vision recognition and optimization processes,Programming Languages: Python, RAPID, C++,Software: RobotStudio, AutoCAD, TIA Portal,Technical Expertise: Technical Drawing, Electronic Systems Design, State Space Control

Awards:

    • Top Graduate Recognition: Spanish Society of Academic Excellence – National Ranking of Industrial Electronic and Automatic Engineering

Research Focus:

Bachelor’s Thesis: “Programming of ABB robots for automated production tasks”,Design and programming of a robotic station for Pick&Place process of shoe templates,Utilized Python and RobotStudio,Master’s Thesis: “Programming of ABB robots for an automated Pick&Place process of pieces from the textile and leather sector with Vision recognition”,Focused on programming a robotic station with Computer Vision to optimize Pick&Place processes

Publications :

Manipulation Order Optimization in Industrial Pick-and-Place Operations: Application to Textile and Leather Industry

  • Authors: F.J. Martínez-Peral, H. Migallón, J. Borrell-Méndez, M. Martínez-Rach, C. Pérez-Vidal

 

Development of a Tool to Manipulate Flexible Pieces in the Industry: Hardware and Software

  • Authors: F.J. Martínez-Peral, J. Borrell Méndez, J.V. Segura Heras, C. Perez-Vidal

 

Multi-Arm Trajectory Planning for Optimal Collision-Free Pick-and-Place Operations

  • Authors: D. Mateu-Gomez, F.J. Martínez-Peral, C. Pérez-Vidal

 

 

 

 

 

 

Mr . Hasibullah Khan | Engineering graphics | Young Scientist Award

Posted on by 21b4bddf87157652317827146367558f

Mr . Hasibullah Khan | Engineering graphics | Young Scientist Award

Mr . Hasibullah Khan ,Kabul Polytechnic University,Afghanistan

Mr. Hasibullah Khan is an esteemed academic and professional in the field of engineering, currently serving as a faculty member at Kabul Polytechnic University, Afghanistan. With a strong background in engineering education and research, Mr. Khan has made significant contributions to his field and has been an influential figure in advancing engineering studies in Afghanistan

 

Professional Profiles:

Orcid

Education :

MSc. in Architecture
Selcuk University, Turkey
23/10/2015 – 10/12/2018

BSc. in Architecture
Kabul Polytechnic University, Afghanistan
10/04/2009 – 05/08/2013

Experience:

Instructor in Architecture Faculty
Kabul Polytechnic University, Kabul, Afghanistan
10/07/2019 – Present

Primary Responsibilities:

  • Prepare classroom schedules for students adhering to the lesson plans and projects
  • Assess the annual performance of students
  • Monitor student participation in the ongoing research projects
  • Evaluate the work of students within the classroom
  • Counsel students to resolve their doubts

Secondary Responsibilities:

  • Active participation in the research projects of the department
  • Assist the library staff in attaining journals and books on architecture for the benefit of students
  • Take disciplinary action against students if found to be misbehaving
  • Maintain close coordination with the head of department (HOD) and other staff members
  • Worked with colleagues and students in reaching institutional objectives and goals to ensure that standards were met
  • Designed, prepared, and developed courses and teaching materials for students

Skills:

Software Proficiency: Microsoft Office, AutoCAD, REVIT Architecture 2020, Maltisim, SketchUp, EES, Lumion,Language Proficiency:,Pashto & Persian: Mother tongues,English: C2 (Listening, Reading, Spoken Interaction), C1 (Spoken Production, Writing),Turkish: C1 (Listening, Reading, Spoken Interaction, Spoken Production, Writing)

Research Focus|:

  • Architectural design with a focus on health and preschool education models
  • Microclimatic architectural design using advanced software tools
  • Sustainable and renewable energy practices in educational institutions
  • Building information modeling (BIM) for cost estimation and scheduling

Publications :

  • Architecture and Health
    Khan, H. (2021). Black Sea Journal of Engineering and Science, Turkey.

 

  • Analyzing Preschool Education Models in Architectural Design
    Khan, H. (2021). A+Arch, Turkey.

 

  • Microclimatic Architectural Design by Interfacing Grasshoppers and Dynamo with Rhino and Revit
    Khan, H. (revision process ongoing).

 

  • Entertainment-Centric Statistical Analysis of Indoor and Outdoor Auditoriums in Mall Construction using Visitors Opinions
    Khan, H. (revision process ongoing).

 

  • Green Campus Design: A Study on Achieving Carbon Neutrality Through Renewable Energy and Sustainable Practices in Afghanistan Educational Institutions
    Khan, H. (revision process ongoing).

 

  • Building Information Model for Cost Estimation and Scheduling in Building Architecture
    Rahimi, M.Z., Khan, H. (2024). Global Journal of Engineering Design and Technology. 13: 192.