Ivana Bolanča Mirković |Industrial engineering| Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Prof. Ivana Bolanča Mirković |Industrial engineering| Best Researcher Award

University of Zagreb Faculty of Graphic Arts,Croatia

Prof. Ivana Bolanča Mirković is a distinguished academic at the University of Zagreb, Faculty of Graphic Arts, Croatia. With expertise in graphic arts and technology, she has contributed significantly to the field through both teaching and research. Prof. Bolanča Mirković is known for her innovative approaches in the integration of graphic design with emerging technologies. She has been instrumental in advancing the study of digital media and its application in graphic arts. Throughout her career, she has published numerous works and collaborated with various institutions to promote the development of graphic technologies. Her dedication to education and research has made her a respected figure in her field.

Summary:

The candidate is an outstanding contender for the Research for Young Scientist Award. Their strong educational background, entrepreneurial ventures, innovative research in AI, virtual reality, and machine learning, and significant academic contributions demonstrate exceptional promise. They have proven to be a pioneer at the intersection of architecture and emerging technologies, driving both academic discourse and practical application.

 

Professional Profiles:

 Scopus

🎓 Education :

Professor Ivana Bolanča Mirković was born on June 7, 1976, in Zagreb, Croatia. She completed her secondary education at the High School of Natural Sciences and Mathematics and continued her academic journey at the Faculty of Natural Sciences and Mathematics of the University of Zagreb, where she graduated in 2002 with a thesis on “Determination of elements in drinking water by atomic spectroscopy and complexometry.” After graduation, she pursued further studies at the Faculty of Graphics, obtaining a master’s degree in Graphic Engineering in 2005, with a thesis titled “Mechanisms of deinking in the function of the ageing of prints.” She later earned her Ph.D. in 2007 with a dissertation entitled “Ecologically more favourable offset inks and mechanisms of deinking of prints.”

 

🏢 Experience:

Professor Bolanča Mirković’s career at the Faculty of Graphics began in 2002 when she was employed as a research assistant at the Department of Environmental Protection. Her involvement in the field of environmental science and technology grew as she participated in various scientific projects and became a recognized expert in her areas of study. Over the years, she has held several prestigious positions, including the editor-in-chief of Acta Graphica since 2022 and leadership roles in multiple scientific committees and projects.

🛠️Skills:

Professor Bolanča Mirković is highly skilled in environmental research, with expertise in using spectroscopic techniques and chemometric methods for ecological applications. She is also proficient in the study of materials and processes involved in graphic reproduction, particularly in the context of sustainability. Furthermore, she has developed strong organizational and leadership abilities through her roles in scientific committees and her involvement in international collaborations

 

Research Focus :

Professor Bolanča Mirković’s primary research interests lie in ecology, industrial ecology, and the application of spectroscopic and chemometric methods to environmental science. Her work also covers the study of paper recycling mechanisms and the aging processes of materials like paints, paper, and prints. She has made significant contributions to sustainable practices in the printing industry and the environmental aspects of graphic materials. Additionally, she has been involved in several research projects aimed at developing more ecologically friendly graphic materials and advancing knowledge in environmental protection.

 

🔬Awards:

Professor Bolanča Mirković has been honored with numerous awards and recognitions throughout her career. Since May 20, 2019, she has been an associate member of the Croatian Academy of Technical Sciences in the Department of Graphic Engineering. In addition to her academic contributions, she has been a key figure in international scientific conferences, serving as a member and president of various program and review committees, particularly in the fields of printing, design, and graphic communications. Her academic achievements and contributions to science have earned her considerable respect in both Croatian and international research communities.

 

Conclusion:

Given their innovative work and leadership in education, this individual shows considerable potential for continued contributions to scientific and technological fields. However, expanding their publication portfolio and focusing on a more unified research direction could enhance their future impact. Overall, the candidate is a fitting nominee for the Research for Young Scientist Award, poised to shape the future of architecture, technology, and design.

 

 Publications:

  • The Influence of the Production Stages of Cardboard Pharmaceutical Packaging on the Circular Economy
    • Authors: Klemenčić, M., Bolanča Mirković, I., Bolf, N.
    • Journal: Sustainability (Switzerland)
    • Year: 2023
    • Citation Count: 1

 

  • Storage of Documents as a Function of Sustainability
    • Authors: Bolanča Mirković, I., Bolanča, Z.
    • Journal: Sustainability (Switzerland)
    • Year: 2023
    • Citation Count: 1

 

  • Technical Characteristics of Incunabulum in Europe
    • Authors: Bolanča, S., Bolanča Mirković, I., Pučić, I.
    • Journal: Tehnicki Glasnik
    • Year: 2023
    • Citation Count: 0

 

  • The Efficiency of the Separation of Impurities from Cellulose Pulp Obtained from Pharmaceutical Laminated Cardboard Packaging
    • Authors: Klemenčić, M., Bolanča Mirković, I., Bolf, N.
    • Journal: Tehnicki Vjesnik
    • Year: 2022
    • Citation Count: 0

 

  • Ecologically Sustainable Printing: Aspects of Printing Materials
    • Authors: Bolanča Mirković, I., Medek, G., Bolanča, Z.
    • Journal: Tehnicki Vjesnik
    • Year: 2019
    • Citation Count: 5

 

  • Recycling Optimisation of the Electrophotographic Prints
    • Authors: Bolanča Mirković, I., Majnarić, I., Bolanča, S.
    • Conference: Proceedings of the International Conference of DAAAM Baltic “Industrial Engineering”
    • Year: 2012
    • Pages: 119–124
    • Citation Count: 3

 

Masoumeh Bararzadeh Ledari | Industrial engineering | Best Researcher Award

Posted on by 21b4bddf87157652317827146367558f

Dr.Masoumeh Bararzadeh Ledari | Industrial engineering | Best Researcher Award

Dr. Masoumeh Bararzadeh Ledari , Amirkabir university and technology, Iran.

Dr. Masoumeh Bararzadeh Ledari is a distinguished researcher and academic affiliated with Amirkabir University of Technology in Iran. Renowned for her contributions to [field/area of expertise], she has published extensively in peer-reviewed journals and has a strong background in [relevant research/industry areas]. Dr. Ledari is recognized for her commitment to advancing science and technology in Iran, and her work has had a significant impact on both national and international platforms.

Summary:

Masoumeh Bararzadeh Ledari is a highly accomplished researcher with expertise in energy engineering, climate change, and sustainability. Her research spans multiple areas, including water-food-energy-climate and land nexus modeling, resource management, regenerative life models, and building engineering simulation. Her extensive education, including a Ph.D. in Energy Engineering from Sharif University of Technology, highlights her deep technical knowledge. With significant professional experience, she has led multiple projects related to low-carbon hydrogen production, sustainable resource management, and climate change mitigation. Her work in the steel and petrochemical industries focuses on developing and implementing environmentally sustainable technologies, with an emphasis on hydrogen as a clean energy source.

Professional Profiles:

Scopus

Google scholar 

Education :

Ph.D. in Energy Engineering (2014-2021),Sharif University of Technology, Tehran, Iran,Thesis: Hybrid technology evaluation model to minimize the physical cost of the dynamic impact of resource usage and depletion on the,ecosystem’s sustainability,Supervisor: Dr. Yadollah Saboohi,Master of Science in Energy Engineering (2009-2011),Sharif University of Technology, Tehran, Iran,Thesis: Flare Load Reduction by Implementing HIPS in Assaluyeh Gas Refinery,Supervisor: Dr. Soorena Sattari,GPA: 16.94/20,Bachelor of Science in Chemical Engineering (2004-2008),Tehran University, Tehran, Iran,Thesis: Recirculating Gasifier Modelling and Developing a Laboratory Setting,Supervisor: Dr. Alireza Talebizadeh,GPA: 17.06/20,Pre-University Qualification in Math & Physics (2003-2004),Fatemie SA High School,GPA: 18.86/20,Diploma of Math & Physics (1999-2003),Maktab Ghoran High School

Work Experience:

Technical Consultant (2023-present),Focus on low-carbon hydrogen production and its integration into various industries.,Leading projects aimed at decarbonizing steel production and transitioning to low-carbon energy sources.,Head of Technical Group (2023-present),Amirkabir University of Technology & Butia Steel Company,Optimization of the water-energy-materials-carbon nexus in production processes.,Integration of hydrogen as a clean energy source in steel production.,Technical Manager (2022-present),Amirkabir University of Technology – Oghlid Steel Company,Development of low-carbon hydrogen pilot units in the steel industry.,Technical Manager (2023)Presidential Center for Progress and Development,,,Contribution to Carbon Capture and Storage (CCS) technology development and policy framework in Iran.,Head of Technology Management Group (2020-present),Engineering and Industrial Management Consultants Group,Technical-economic development projects focused on resource optimization and industrial processes.,Scientific Director (2021-2022),Tadbirgaran Energy Company – Sharif University of Technology,Technical consultant for energy management and optimization in power plants.

Teaching Experience:

Instructor,Sharif University of Technology, Tehran, Iran,Courses: Building Energy Saving and Optimization, Optimization of Energy Streams (Exergy,Adjacent Professor,AmirKabir University of Technology, Tehran, Iran,Courses: Waste Management in Energy Systems, Renewable Technologies Design and Analysis,Instructor,Tehran University, Tehran, Iran,Course: Building Life Cycle – Carbon Design

Research Focus:

Water-Food-Energy-Climate and Land Nexus Modeling,Resource Management in Circular Economy,Regenerative Life Models and Sustainable Development,Exergy Analysis for Ecosystem Imitation,Climate Change Impact on Natural Resources,Life Cycle Assessment (LCA) and Environmental Sustainability,Hydrogen Development for Low-Carbon Industries

Skills:

Energy Systems Optimization,Exergy Analysis and Thermodynamics,Resource  Management and Circularity,Climate Change Adaptation and Mitigation,Low-Carbon Hydrogen Production,Carbon Capture and Storage (CCS) Technologies,Life Cycle Assessment (LCA),Multi-Sectoral Nexus Modeling (Water-Energy-Land-Climate),Energy Efficiency in Industrial Processes,Technical and Economic Feasibility Studies

Conclusion:

Masoumeh Bararzadeh Ledari’s impressive background in energy engineering, climate change, and sustainable resource management makes her a suitable candidate for the Best Researcher Award. Her research and professional contributions have significant impacts on environmental sustainability, particularly in the areas of low-carbon energy production, climate change mitigation, and the efficient use of resources.

Publications :

Advanced utilization of urban sewage sludge for low-carbon hydrogen and power production in steel manufacturing

  • Authors: MB Ledari, H Akbarnavasi, H Khajehpour, D Bayat, S Edalati
  • Year: 2024
  • DOI: 10.1016/j.enconman.2024.118657

 

2. Aligning Net zero energy, carbon Neutrality, and regenerative concepts: An exemplary study of sustainable architectural practices

  • Authors: SZH Sadat, MB Ledari, H Dehvari, MS Moghaddam, MR Hosseini
  • Year: 2024
  • DOI: 10.1016/j.jobe.2023.109414

 

3. Optimal Planning and Operation of Energy Systems for Cryptocurrency Exploration, Hydrogen Production, and National Power Grid

  • Authors: A Fathi, H Yousefi, A Ghayedhosseini, MB Ledari, M Salehi, P Hajialigol
  • Year: 2024

 

4. Sustainable hydrogen supply chain development for low-carbon transportation in a fossil-based port region: A case study in a tourism hub

  • Authors: F Maleki, MB Ledari, M Fani
  • Journal: International Journal of Hydrogen Energy
  • Year: 2024

 

5. Fostering self-sustaining water-energy regions: A nexus approach to mitigate water scarcity

  • Authors: A Sarikhani, F Joda, MB Ledari, H Akbarnavasi
  • Journal: Sustainable Production and Consumption
  • Year: 2023
  • DOI: 10.1016/j.spc.2023.08.016

 

6. BIM with Blockchain for Decentralised Circular Construction Supply Chain

  • Authors: MBL Faris Elghaish, M Reza Hosseini, Tuba Kocaturk, Mehrdad Arashpour
  • Journal: Digitalization in Construction
  • Pages: 25
  • Year: 2023

 

7. Greening steel industry by hydrogen: Lessons learned for the developing world

  • Authors: MB Ledari, H Khajehpour, H Akbarnavasi, S Edalati
  • Journal: International Journal of Hydrogen Energy
  • Year: 2023

 

8. Water-food-energy-ecosystem nexus model development: Resource scarcity and regional development

  • Authors: MB Ledari, Y Saboohi, S Azamian
  • Journal: Energy Nexus
  • Year: 2023

 

9. An optimization strategy for enhancing energy consumption performance in digital currency miner’s building

  • Authors: AG Hossein Akbarnavasi, Masoumeh Bararzadeh Ledari
  • Journal: Energy Conversion and Economics
  • Year: 2023

 

10. Digitalised circular construction supply chain: An integrated BIM-Blockchain solution

  • Authors: F Elghaish, MR Hosseini, T Kocaturk, M Arashpour, MB Ledari
  • Journal: Automation in Construction
  • Pages: 104746
  • Year: 2023

 

11. Nature as a Teacher for Abiota Self-Organization in Terms of Entropy Analysis

  • Authors: MB Ledari, RB Ledari
  • Journal: Exergy-New Technologies and Applications
  • Year: 2023

 

12. Long- and Short-term Prediction of Bitcoin Energy Consumption

  • Authors: AGMBM Fani
  • Conference: International Conference on Technology and Energy Management (ICTEM, IEEE)
  • Year: 2023

 

13. BIM with Blockchain for Decentralised Circular Construction Supply Chain

  • Authors: F Elghaish, MR Hosseini, T Kocaturk, M Arashpour, MB Ledari
  • Book Chapter: Digitalization in Construction
  • Year: 2023

 

14. Building circularity as a measure of sustainability in the old and modern architecture: A case study of architecture development in the hot and dry climate

  • Authors: SMH Honarvar, M Golabchi, MB Ledari
  • Journal: Energy and Buildings
  • Year: 2022